- Elkay is not responsible for improper drain installations.
- Elkay is not responsible for the sink if damaged during installation.
- Follow all local plumbing and building codes.
- Inspect drain for damage prior to beginning installation.
Required Tools (not included)
Apply plumber’s putty or sealant to the top of the sink drain flange area. Place drain body in the the drain opening of the sink.
From the underside of the sink, slide the rubber gasket over the bottom of the drain body till it’s flush with the bottom of the sink.
Slide the drain housing over the bottom of the drain body till it’s flush with the rubber gasket and the bottom of the sink. Thread on the lock nut until tight with the housing.
Place the plastic washer inside of the tail piece. Slide the coupling nut over the tail piece.
Thread on the coupling nut onto the drain housing until tight.
Wipe away any excess plumber’s putty from the sink with a rag. Place strainer basket into the drain body.
*Note: Drain bodies and strainer baskets may vary depending on models. Some models may come with a strainer grid, in place of a strainer basket, that will need to be screwed into the drain body.
**Model shown is a LK99.